Interface Tan (SW 6059)

Interface Tan SW 6059#C1A392, LRV 40
Living room with walls painted Sherwin-Williams Interface Tan SW 6059 (simulated)
Living room, walls in Interface Tan

Illustrative room. Screen colors vary; test a sample before you paint.

Interface Tan (SW 6059) is a medium, warm beige from Sherwin-Williams: LRV 40, so it reflects about 40 percent of the light that hits it.

Colors that go with Interface Tan

Four Sherwin-Williams colors picked for Interface Tan by this site's color math: a trim white, a deeper beige, a quiet contrast from another family, a dark accent. Sherwin-Williams did not choose these pairings.

Closest match in every other brand

Each brand's closest color to Interface Tan, ranked by CIEDE2000 (deltaE): under 1.0 is indistinguishable, 1.0 to 2.3 very close, 2.3 to 5 noticeably different, over 5 clearly different.

BrandClosest colorCodeLRVdeltaEHow close
Benjamin MooreVenetian PorticoAF-18541.92.3noticeably different
BehrCozy BlanketICC-5340.81.9very close
ValsparDesert Travels2001-10A442.3very close
PPG PaintsWright Stone GreyFLLW858401.8very close

Lighter and darker in Sherwin-Williams

Color data

BrandSherwin-Williams
Color codeSW 6059
Hex#C1A392
RGB193, 163, 146
HSL22°, 27%, 66%
LRV (light reflectance value)40
Lab L*, a*, b*69.2, 8.4, 12.9
UndertoneWarm Yellow-Red
Temperaturewarm
Color familyBeige

Same paint, two kinds of light

Interface Tan (SW 6059), published as #C1A392

North light (cool, indirect)
#B19990
South light (warm, direct)
#D1AD92

These swatches and the rooms above are a simulation, not a measurement. How the visualizer works

Similar shades from Sherwin-Williams

More from Sherwin-Williams

Common questions

What is the LRV of Interface Tan (SW 6059)?
Interface Tan has an LRV of 40. LRV runs from 0 (black) to 100 (pure white) and measures the share of light a surface reflects, so Interface Tan is a medium color.
What is the closest match to Interface Tan in another brand?
Wright Stone Grey (PPG FLLW858) from PPG Paints, at a deltaE of 1.8 (very close).
Is Interface Tan warm or cool?
Sherwin-Williams lists Interface Tan as warm, with a Warm Yellow-Red undertone. Its Lab b* value is 12.9; a higher b* is warmer and yellower, a lower one cooler and bluer.

Sources: LRV and hex as published by the manufacturer, via PaintDB (CC BY 4.0). Color differences are CIEDE2000 values computed by this site from the hex values (data snapshot 2026-10-01). Color names and codes belong to their manufacturers.

Published . Updated .